axial rotation

英 [ˈæksiəl rəʊˈteɪʃn]

美 [ˈæksiəl roʊˈteɪʃn]

网络  绕轴自转; 自转; 轴向转动; 轴向旋转; 绕轴旋转

英英释义

noun

• rotary motion of an object around its own axis
  1. wheels in axial rotation
  Synonym:axial motionroll

双语例句

• Axial Rotation Symmetry of Third-order Nonlinear Elasticity of Quasicrystals
  准晶三阶非线性弹性的轴转动对称性
• When swinging drive mechanical operation, such as the rotation speed of the force to make efforts axial shaft before and backward rotation and enable higher plane.
  当摇摆传动机械运作时，等速度的旋转入力轴使出力轴向前和向后旋转，并使平面升高。
• Suspended rotor axial rotation drive is based on the principle of variable capacitance micromotor.
  悬浮转子的旋转驱动是基于轴向变电容静电微电机原理。
• Conclusion: Unilateral pedicle screws fixation cannot provide sufficient stability in lateral bending and axial rotation, pedicle screws endure more stress.
  结论：单侧椎弓根螺钉固定不能很好地控制侧屈和旋转载荷，椎弓根螺钉承受较大的应力；
• Objective To examine the morphological changes in the cervical intervertebral foramen during axial rotation of cervical spine and explore its clinical significance for the diagnosis and treatment of cervical degenerative disease.
  目的分析旋转对颈椎间孔形态的影响，并探讨其对临床工作的指导意义。
• Spatial Axial Rotation Symmetry of Physical Properties of Crystals
  晶体物理性质的空间轴转动对称性
• Conclussion: Spine without instability in the anterior and middle columes fixed with TLS increases significantly in flexion, extension, lateral bending and axial rotation stability, especially in rotation.
  结论：在无明显前中柱不稳时，TLS固定后脊柱的前屈、后伸、侧弯和旋转的稳定性明显增加，尤其旋转增加较多；
• [ Conclusion] ( 1) STDSP is superior to TCS in the axial loading and rotation stability and. bone construction strength retention.
  [结论]（1）静态三维钉板系统（STDSP）的轴向抗压与抗扭能力以及内固定拆除后骨强度的保留能力，均优于3根松质骨螺钉；
• Motions of flexion/ extension, lateral bending and axial rotation were produced by six pure moments with maximum of 10.0N · m and measured with stereophotogrammetry.
  对标本施加最大为10.0N.m的力偶矩，使之产生前屈、后伸、左右侧屈和左右轴向旋转运动，并由双平面立体测量的计算机图像分析系统得到节段运动范围。
• This model was validated by comparing the average stiffness tested in flexion and extension, left lateral bending, and left axial rotation under physiological loading with the corresponding in vitro experimental data and finite element analysis data published by other scholars.
  模型的验证是通过计算在屈伸、侧弯、轴向旋转加载条件下的平均刚度值，并与以往学者实验模型及有限元模型的分析结果相比较，分析其符合程度。